![]() Note: Because groups are band-dependent, some systems don't have multiple groups. Tune a receiver and transmitter to the best available channel within its group to set up your system. A single frequency within a group is a channel. A group is a set of compatible frequencies within a frequency band. To minimize interference, Shure wireless systems organize RF bands into predefined groups and channels. Menu & Power: Locks the menu and disables the power switchĭisplays the firmware, hardware, and band information.Menu Only: Locks the menu to prevent transmitter settings from being changed.Note: Menu is not selectable when Shure rechargeable batteries are installed. To ensure accurate battery metering, set the battery type to match the installed AA battery type. Match audio levels between two transmitters used in a combo system. Channel name/Battery icon/Group and channel.Channel name/Group and channel/Battery icon.Use the enter button to select one of the following home screen displays: Use the enter button to select and confirm options on the active menu screen. Each additional press of the menu button advances to the next menu screen. To access the menu options from the home screen, press the menu button. The transmitter features individual menu screens for setting up and adjusting the transmitter. Provides a link to additional materials () Update transmitter firmware using IR syncĭisplays firmware version and serial number Restores all settings to factory defaults following a system reboot Save current receiver settings or restore last saved settings Switch between automatic and manual IP addressingīlock or allow third-party control access Lock Menu & Power: Receiver settings and power button are locked.Lock Menu: Receiver settings are locked.Monitor audio levels and adjust the receiver gain Manually tune the receiver to a desired frequency Receiver automatically scans for available channels within the selected group RF performance is the same in single-group bands as in bands that support multiple groups. Note: Some bands consist of only a single group. Receiver automatically scans for the best available group, if applicable. Step-by-step instructions to initialize a new system, or to add a receiver to an existing system Push the control knob button to access the menu, and rotate to advance to the next menu screen. System configurations include handheld transmitters with interchangeable microphone capsules, bodypacks with a range of lavalier, headset and instrument microphones and single and dual rack-mountable receivers.Transmitters use 2 AA batteries or Shure SB903 rechargeable battery.Guided setup mode installed in each SLX-D receiver.Elegant and easy-to-use interface with high-contrast LCD menu.Third-party setup and control via Ethernet.Remote monitoring and control via ShurePlus™ Channels app.Compatible with Shure Wireless Workbench® control software.Link multiple receivers for group scan and firmware updates via Ethernet port.Easy pairing of transmitters and receivers over IR scan and sync.Up to 10 compatible systems per 6MHz TV band 12 systems per 8 MHz band. ![]() 32 available channels per frequency band (region dependent).44 MHz tuning bandwidth (region dependent).Extended 20 Hz to 20 kHz frequency range (microphone dependent).Regardless of your skill level, this is the only guide to Digital Performer you will ever need to take your music to the next level. This setup allows new users to work through the book from start to finish and learn Digital Performer quickly, while intermediate and advanced users can flip to specific areas of interest to learn new tricks and increase their mastery. ![]() Chapters and sections progress naturally through the music production process, from navigating the interface, setting up projects, and recording, to working with MIDI, editing, arranging, mixing, mastering, handling music notation, and scoring to picture. ![]() The book's approach is one that will simplify and demystify the technical aspects of setting up and using Digital Performer 5, while also supplying useful engineering tips and shortcuts to help you get the most out of the program. Digital Performer 5 Power!: The Comprehensive Guide provides a versatile guide to setting up and using the newest version of MOTU's Digital Performer 5 audio/MIDI sequencing, editing, and recording software. It allows you to sequence MIDI, record multiple channels of audio, mix them down, synch them to video, and utilize plug-in software synthesizers and software studios. Digital Performer is one of the leading digital audio workstation programs for the Apple Mac.
0 Comments
Leave a Reply. |